嘉立创地阔星STM32F103C8T6 arduino ch340串口烧录
因为手里面有一个ESP-01S的下载器，芯片是CH340的，想着应该能用的话，就暂时不用买ST-LINK或USB转TTL模块了。烧录时老是忘记细节，每次遇到报错都要排查一遍，特别麻烦，特此记录一下烧录前的检查项。
Sketch uses 14200 bytes (21%) of program storage space. Maximum is 65536 bytes.
Global variables use 2184 bytes (10%) of dynamic memory, leaving 18296 bytes for local variables. Maximum is 20480 bytes.
maple_loader v0.1
Resetting to bootloader via DTR pulse
#
# A fatal error has been detected by the Java Runtime Environment:
#
#EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x000000007110b5db, pid=38372, tid=0x0000000000008198
#
# JRE version: Java(TM) SE Runtime Environment (8.0_451) (build 1.8.0_451-b10)
# Java VM: Java HotSpot(TM) 64-Bit Server VM (25.451-b10 mixed mode windows-amd64 compressed oops)
# Problematic frame:
# C
#
# Failed to write core dump. Minidumps are not enabled by default on client versions of Windows
#
# An error report file with more information is saved as:
# C:\Users\alpha\AppData\Local\Arduino15\packages\stm32duino\tools\stm32tools\2022.9.26\win\hs_err_pid38372.log
#
# If you would like to submit a bug report, please visit:
# http://bugreport.java.com/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
#
物料清单
嘉立创地阔星开发板STM32F103C8T6
CH340烧录（我这里用的是ESP-01S的下载器）
检查项一
连线
STM32F103C8T6CH3403V33V3GNDGNDA09 (TX)TXDA10 (RX)RXD
引脚图
检查项二
跳线帽如下
BT10BT01
检查项三
打开STM32CubeProgrammer测试连接。
先选UART；再选Port；最后点connect。如果连接成功，可以关掉STM32CubeProgrammer，防止端口占用。
https://img2024.cnblogs.com/blog/709034/202508/709034-20250815160808064-1976538885.png
连接成功如图所示：
检查项四
打开Arduino，检查开发板烧录配置，upload method修改为"Serial"。
烧录成功
附上测试代码
/*
* Test program for the STM32F103C8T6
*/
#include "Arduino.h"
int counter = 0;
// const int PA1 = 11;
// const int PA3 = 13;
void setup() {
Serial.begin(9600);
Serial.println("Hello, World!");
pinMode(PA3, OUTPUT);
pinMode(PA1, OUTPUT);
}
void loop() {
Serial.println("Hello, World!!!" + String(counter));
counter++;
delay(1000);
digitalWrite(PA3, HIGH);
digitalWrite(PA1, HIGH);
delay(1000);
digitalWrite(PA3, LOW);
digitalWrite(PA1, LOW);
delay(1000);
}
来源：程序园用户自行投稿发布，如果侵权，请联系站长删除
免责声明：如果侵犯了您的权益，请联系站长，我们会及时删除侵权内容，谢谢合作！ 懂技术并乐意极积无私分享的人越来越少。珍惜 用心讨论，共获提升！ 收藏一下 不知道什么时候能用到
页:
[1]